If you take a closer look at your tiles, and consider the tile grout, a very interesting question should be kept in mind, that is, since the floor grout is so incredibly viable, it should be called something like tiles. Why use it as it can get dirty easily? "
You are right to ask this question. The fact is that the grout extends just below the floor surface to the floor substrate, and can be described as a sponge that absorbs dirt, grime, and detergent every time it touches the floor. Grout cleaning is also harder and harder with conventional chemicals, and strong chemicals cause incredible damage to the grout.
Grout stains are also more pronounced on light-colored grout, which is why darker types are more commonly used for laying tiles (masked to make the future more serious.) However, even with the darker version also, you can easily see the dirt in areas where the traffic is heavy. It is incredibly difficult to find all areas of the floor when cleaning. There are always areas that are overlooked.
It is a fact that no tile cleaner will be able to lift or lift 100 serious lifts except acid throwing acid. To avoid being tainted, you can consider a grout seller, who can prevent the gram from entering. But grout sellers also need to reuse it at intervals throughout life. So you come back to the problem of cleanliness, as it is recommended to clean the tile grout thoroughly before sealing the grout (otherwise you seal the floor dirt).
Development is not very difficult, so when harsh chemicals are used, it breaks down easily and loses its structure. Improper chemical use also increases permeability, which increases anxiety. Once the structure is complete, it is impossible to repair the grout. Therefore, the only way to extend the life of grout is to use proper tiling and cleaning methods.
How to clean grout without cleaning product, Ultimate grout cleaner. Steam
Steam cleaning can be a new concept for you, so it's best to have a clean supply as well as a better understanding of how it works.
OL, steam comes in different forms. At normal pressure (in an open vessel) water cannot be heated above 100 degrees Celsius. Even if you increase the temperature, the water temperature does not rise - what happens runs away from the vessel.
However, if the vessel is sealed, you can heat the water to a higher temperature before it starts to boil. This is because the amount of energy required to make steam against high-pressure increases. Such steam-generating water is heated to a temperature of about 180 degrees Celsius.
Steam produced under high pressure is known as dry vapor steam. This type of steam is very different from what we call 'everyday' steam because it has a very low moisture content (5%) and a large amount of steam vapor when dried. One liter of hot water under pressure will produce a large amount of dry steam.
Because dry evaporators contain smaller molecules than water, they can penetrate you deeper and clean you deeper. Too much, because the steam at the point of delivery is too hot which can cause the surfaces to expand, so it helps to leave a mess.
A common misconception about steam cleaning is that steam is delivered at higher pressures because it is produced at the same pressure. This is not because steam is easily released in a controlled manner. It's not a steam blast that clears (unless you really need one) but more so that the steam can go into the ground and pick up dirt and brimstone.
Chemical cleaning really can't go very deep after using water. But dry steam can penetrate and soften fever molecules that build up deep in the grout holes and put the grout on the surface without affecting the structure at all.
Also, when you use steam for tile and grout cleaning, a small brush is usually attached to the steam lens. The mechanical action of this brush loosens the hardest layer of heat and removes the increasing rotation from the grout so that it does not return.
It is also important to note that household steam cleaners produce steam at much lower pressure and heat than commercial steam cleaners. This means that they cannot clean the grout as much as a commercial machine can. Steam cleaning machines that are rated at 6 bar pressure or more when it comes to cleaning grout.